Installation Process; Installing An Rhub; Installing An Rhub In A 19-Inch Cabinet Or Rack - Huawei LampSite Installation Manual

LampSite
Installation Guide

4.2 Installation Process

The RHUB installation involves installing an RHUB module, installing RHUB cables, checking
the RHUB hardware installation, and powering on the RHUB.
Figure 4-11
Figure 4-11 RHUB installation process

4.3 Installing an RHUB

An RHUB can be installed in a cabinet, rack, shelf, or on a wall.

4.3.1 Installing an RHUB in a 19-Inch Cabinet or Rack

This section describes how to install an RHUB in a 19-inch cabinet.
Procedure
l
Issue 02 (2014-05-27)
shows the RHUB installation process.
The following describes how to install an RHUB with mounting ears in reverse mode:
NOTE
If necessary, request one more person for assistance.
1. With one hand holding it, align the mounting holes with the installation holes, slowly
push the RHUB into the required position in the cabinet, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installing an RHUB
Figure 4-12.
18