Options For Server Module Enclosure - NEC Express5800/D120h Configuration Manual

SYSTEM CONFIGURATION GUIDE

Module enclosure P/N depends on internal drive configuration. Module enclosure for embedded SATA controller configuration
[N8141-83F/-84F/-91F] supports module enclosure with embedded SATA controller configuration only. Others [N8141-92F/-93F/-
94F] supports with RAID controller configuration or SAS HBA configuration only.

When installing to 1U server module enclosure, up to four server modules can be installed.

When installing to 2U server module enclosure, up to two server modules can be installed.

Please connect CMC management LAN on module enclosure to management server or PC for monitoring cooling fan and PSU.

Blank modules [N8141-85] must be installed into vacant module enclosure slots.

Predecessor (ex. Express5800/E120f-M, E120g-M) server module can't install into server module enclosure.
2.2

Options for Server Module Enclosure

2.2.1 Blank Module
Product Name / Description
Blank Module
1pc of filter module for Module Enclosure slots.
NOTE:

Blank Module must be installed into vacant Module Enclosure slots.

Blank Module is for 1U Module Enclosure [N8141-83F/-84F/-92F/-93F].
NEC Corporation
–
NEC Express5800/D120h
Revision 1.0 – October, 2017
Part Number
N8141-85
9