Table of Contents
Advertisement
SYSTEM CONFIGURATION GUIDE
Configuration Diagram
Configuration Diagram is the useful tool for configure D120h. This diagram shows three components. One is the standard
components, second is the selectable components, and last is the optional components. For example of 1U Module Enclosure, drive
cage, fan, rail and PSU is the standard component which has been already installed into 1U Module Enclosure. All you have to do is
purchase two nodes (Server Modules) which is the selectable components. In addition, the rest, you can install more two nodes
(server modules) as you need.
Module Enclosure (1U)
24x 2.5-
inch
Drive
Cage
Legend:
Standard Components
1U Server Module
Legend:
Standard Components
NEC Corporation
–
NEC Express5800/D120h
FAN
Minimum required components
4x DIMM Slot
4x DIMM Slot
CPU1
CPU H/S
1x DIMM
4x DIMM Slot
4x DIMM Slot
Minimum required components
Revision 1.0 – October, 2017
Rail
Node 1 (Upper)
/
Node 2 (Lower)
Node 3 (Upper)
/
Node 4 (Lower)
Rail
SATA
DOM
CPU0
CPU H/S
TPM
PSU 1/2
Optional components
PCI Slot 2
PCI Slot 1
LAN Mezz.
(Slot 3)
Optional components
5
Advertisement
Table of Contents
