Important Safety And Product Information - Danfoss ECL Comfort 210 Operating Manual

ECL Comfort 210 / 296 / 310, Floor (Screed) Drying Program

1.1 Important safety and product information

1.1.1 Important safety and product information
This Operating Guide is associated with ECL Application Keys which
have the floor drying program implemented. The application Key
must have version 2.42 or higher. The ECL Comfort controller
software must have version 1.56 or higher.
The described functions are related to the floor drying process only.
See the Installation Guide (delivered with the application key) for
application examples and electrical connections.
See also the related Installation Guide (find it on
http://heating.danfoss.com ) for description of the functions.
The Application Keys comply with ECL Comfort 210 / 296 / 310
controllers as of software version 1.11 (visible at start-up of the
controller and in 'Common controller settings' in 'System').
Additional documentation for ECL Comfort 210, 296 and 310,
modules and accessories is available on http://heating.danfoss.com.
Documentation for ECL Portal: See http://ecl.portal.danfoss.com.
2 | © Danfoss | 2017.08
Application keys might be released before all display texts are
translated. In this case the text is in English.
Automatic update of controller software (firmware):
The software of the controller is updated automatically when the key
is inserted (as of controller version 1.11 (ECL 210 / 310) and version
1.58 (ECL 296)). The following animation will be shown when the
software is being updated:
Progress bar
During update:
• Do not remove the KEY
If the key is removed before the hour-glass is shown, you have
to start afresh.
• Do not disconnect the power
If the power is interrupted when the hour-glass is shown, the
controller will not work.
VI.JM.P2.02