System; Operation Mode; Ip Settings - EnGenius EAP350 User Manual

6 System

6.1 Operation Mode

The EAP350 supports four operating modes: Access Point,
WDS Access Point, WDS Bridge and Repeater.
Device Name: Enter a name for the device. The name you type
appears in SNMP management. This name is not the SSID and
is not broadcast to other devices..
Operation Mode: Use the radio button to select an operating
mode.
Accept / Cancel: Click Save & Apply to confirm the changes or
Cancel to cancel and return previous settings.

6.2 IP Settings

This page allows you to modify the device's IP settings.
IP Network Setting: Select whether the device IP address will
use the static IP address specified in the IP Address field or be
obtained automatically when the device connects to a DHCP
server.
IP Address: The IP Address of this device
IP Subnet Mask: The IP Subnet Mask of this device.
Default Gateway: The Default Gateway of this device. Leave it
blank if you are unsure of this setting.
Primary/Secondary DNS: The primary / secondary DNS
address for this device.
Use Link-Local Address: Check this if you want to use Link-
Local Address.
IPv6 IP Address: The IPv6 IP Address of this device.
IPv6 Subnet: The IPv6 Subnet Prefix Length of this device.
24