Page 3
Rapido can be used to clean oor surfaces as varied as hardwood, linoleum, leather, carpets, and even walls. The Rapido was designed to be long lasting, and as powerful as the day you rst opened it with cyclone technology that eliminates suction loss when you clean.
Clean the outside with dry, non-abrasive cloth only. Do not spray water or liquids onto the Rapido. • Do not insert objects into the Rapido or allow the Rapido to clean up near any part of your body. • Do not block the exhaust vents. Obstructing ventilation may cause overheating and malfunctions.
Please ensure the plug is fully inserted and/or connected to the wall outlet before charging. Improper insertion may result in electric shock, short circuiting, smoke, or fire. • Store the Rapido indoors at a stable temperature. Do not store in an unheated garage, shed, or other location with extreme temperature fluctuations. 1.2 – Disposal at End-of-Life This product must not be disposed of by incineration, land lling, or mixing with household trash.
• The Crevice Tool comes with a sliding brush attached. Section 3. Usage Instructions The Rapido comes with various accessories which may be used for di erent cleaning needs. When using the various attachments, use the Main Body and di erent connection types as needed.
Page 8
Connection Type Attachment Type Cleaning Type For general dirt and debris. Slowly draw the head over the desired surface to collect debris. Extension Tube or direct connection Floor Tool For general dirt and debris in small or hard to reach areas. Draw the head slowly over the desired surface to collect debris and/or slide the brush...
Use only the attachments included in the original packaging or received from RolliBot. • After using the Rapido Vacuum and/or any of its attachments, be sure to turn it off and/or store as desired. For storage instructions, see Section 5.
4.3 – Cleaning the Canister Necessary Canister maintenance includes emptying the top and bottom of the Canister. Allowing debris to remain in the Canister will keep Rapido from working properly. It is recommended to empty the Canisterafter every 1-2 cleaning cycles. For Canister and additional maintenance, see the images and instructions in the upcoming sections.
Step 4 Return the top and connected Hold the Canister over a waste bin Step 3 Filtration System to the Canister. Fold and empty the top. the Canister clips down to refasten the top. Reattach the Canister to the Main Body as seen in Section 4.2. If needed, the Canister may be wiped clean inside and out with a water-dampened cloth.
• Allowing debris to remain in the filter will keep the Rapido’s filtration from working properly. • If rinsed, the filter MUST be fully dried before reinstalling. If water enters the inside of the Rapido, the vacuum may sustain serious internal damage.
2. Ensure the lock button at the bottom of 2.The Canister is open. the Canister is not open. If the information in this section did not resolve your issue, please visit our website at 1-844-585-6295 www.rollibot.com or contact customer support...
Warranty services are provided by Warranty Pro. If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, RolliBot will: (1) repair the hardware defect by using new or refurbished parts that are equivalent to new in performance and reliability;...
Need help?
Do you have a question about the Rapido and is the answer not in the manual?
Questions and answers