Samsung SMARTCAM D1 User Manual page 10

to check before installing
• Check your in-home chime whether it is a mechanical or electrical one.
• It is expected most of current mechanical chimes work properly except for one
with a special feature, etc.
• Check out the compatible chime list on the website which is updated on
monthly basis.
Installing power stabilizer
Connecting power stabilizer to existing mechanical
chime.
Find a breaker to cut off the electricity
1.
Find existing chime bell in the house. (following
2.
your sound)
Open the chime cover and unscrew the
3.
[FRont] [tRanS] wires with a screwdriver.
10 · English
Connect the supplied power cord to the power
4.
stabilizer socket.
Open the holding pins of the enclosed two connectors,
5.
connect the wire pulled out from [FRont], and close the
holding pin.
Connect each "L" connectors to each of the two wires inside the chime.
6.
FRONT
TRANS
REAR
Place the power stabilizer in a suitable place inside the chime. (If there is no
7.
space, attach a double-sided tape to the outside.)
Close the chime cover.
8.