Troubleshooting; Printer Does Not Function At All; Printer Does Not Print When I Press Print; Some Images Printed, But Then The Printer Stopped - Polaroid P-500 User Manual

Troubleshooting

Printer does not function at all.

The film pack is not in the printer.
• Load the film pack into the printer.
The battery in the film pack is too low or
dead.
• Replace the film pack.
Environment is very cold, causing reduced
performance.
• If using the printer at temperatures below
55°F(13°C), keep film packs warm, then load
just before use.

Printer does not print when I press Print .

The default image number is "000."
• Select an image to print.
The film pack is jammed.
• Open the film compartment, clear the jam, and
turn the printer on. The exposed frame ejects.
The film pack is empty.
• Insert a new film pack.
The battery in the film pack is too low or
dead.
• Replace the film pack.

Some images printed, but then the printer stopped.

A partially used film pack was loaded which
defaults the film count to 10. Although the
printer allowed you to program 10 images,
the film ran out.
• Insert a new film pack.
The battery in the film pack is too low.
• Replace the film pack.
User's Guide
P–500
11