Mower Belt Replacement - Kubota GR1600-II Operator's Manual

[RCK42]
(1) Spindle holder
(2) Blade
(3) 2-Cup washers
(4) Shim
(5) Bolt
(6) Spindle guard
A Tighten the 2 blade bolts to 98 to 117.6 N-m (10 to 12
kgf-m) of torque.
[RCK48]
(1) Spindle holder
(2) Cover
(3) Blade
(4) Spring plate
(5) Bolt
A Tighten the bolts of the outer blades from 103 to 118
N-m of torque.
A To prolong the service life of the blade, reposition to
each other ((1), (2)) as shown.
PERIODIC SERVICE
[RCK48]
(1) LH blade
(2) Center blade
(3) RH blade (No reposition)
BMower Belt Replacement
1. Remove the mower deck from the machine according
to the procedure "DISMOUNTING THE MOWER
DECK".
2. Remove the left and right hand shields from the mower
deck.
3. Clean around the pulleys to remove the belt from the
pulleys. Slip the belt over the top of the pulley.
4. Remove both brackets which mount the gear box to
the mower deck.
[RCK42]
(1) Bolt
(2) Bolt, nut
Tighten each bolt and nut with following torque.
A Bolt M12
77.6 to 90.2 N-m (8.0 to 9.2 kgf-m)
A Bolt M10 and Nut M10
48.1 to 55.9 N-m (4.9 to 5.7 kgf-m)
69