To Create An Ethernet Connection To An Isp - Acer N10 Manual

Acer pda handheld manual
Hide thumbs Also See for N10:
Table of Contents

Advertisement

9 Getting c onnec t ed
Connecting to the Internet
10
1
2
3
4
5
6
96
In the Dialing Locations tab, specify your current location and phone type (most
phone lines are tone). These settings will apply to all connections you create.
To start the connection
To start the connection, simply start using one of the following programs. Your
handheld will automatically begin connecting. Once connected, you can:
• Send and receive email messages by using Inbox.
Before you can use Inbox, you need to provide the information it needs to
communicate with the email server. For instructions, see "Connecting directly
to an email server" on page 99.
• Visit Web and WAP pages by using Pocket Internet Explorer.
For more information, refer to "10 Using Microsoft® Pocket Internet
Explorer" on page 101.
• Send and receive instant messages with MSN Messenger.
For more information, refer to "MSN® Messenger" on page 54.

To create an Ethernet connection to an ISP

Obtain the following information from your ISP:
• User name and password
• Domain name
Insert the Compact Flash Ethernet card (purchased seperately) into your handheld's CF
slot.
NOTE: For instructions on inserting and using a CF Ethernet card, see the documentation
that came with the card.
The first time you insert the card, Network Settings will appear automatically so that
you can configure the Ethernet settings. Most networks use DHCP, so you should not
have to change these settings unless your network administrator instructs you to do
so.
NOTE: If Network Settings does not appear or you wish to change settings later, tap
and then Settings. On the Connections tab, tap Network, tap the adapter you want to
change, and then tap Properties.
Tap OK.
Connect the Ethernet card to the network by using a network cable.
Tap
, Settings, Connections tab, and then Connections.
From the My network card connects to list, select Internet.
To start the connection, simply start using one of the programs listed in the preceding
section. Once connected, you can perform the same activities as listed in the preceding
section.

Advertisement

Table of Contents
loading

Table of Contents