If you are unsure how an electric shower works, please read through the section
"User Instructions" before continuing.
1.
Electrical supply is turned
off at the mains.
4.
Check for water leaks.
7.
PUSH
Push START button.
10.
Turn control to full cold.
COMMISSIONING
2.
Set control to LOW.
5.
Turn control to full cold.
8.
0-5 secs
Water will be flowing at a
cool temperature.
11.
Set control to MEDIUM.
16
3.
Turn water supply fully
on.
6.
S w i t c h o n e l e c t r i c a l
supply.
9.
Tu r n c o n t r o l s l o w l y.
Temperature remains cool
and flow is reduced.
12.
5-10 secs
The temperature will rise
slightly.
+
_