Table of Contents
Advertisement
Basic Operation
Turning the TV On and Off
1
After connecting a CATV or antenna to your LCD TV, and turn the POWER SWITCH of rear
TV on, an amber LED light indicates when the LCD TV is activated.
2
Press the
button, the LED green light indicates on.
POWER
3
Press the
button, the LED amber light indicates off .
POWER
Select Source
Press the
button to display the selection signal on the screen.
SOURCE
Select TV Channel
1
Press the
button on the remote control and the
CH+/-
TV to select channel.
2
Press the
buttons then press the
0~9
the selection channel No.
3
Press the
button on the remote control to swap the channel between the current
JUMP
channel No. and the previous channel No.
Adjusting the Volume
Press the
button on the remote control or the
VOL +/–
adjust the volume.
To Mute the Sound
1 Press
and the sound cuts off .
MUTE
2 To turn mute off , press the
Sleep Timer
Press the
button continuously to select the sleep timer or turn the sleep timer from the
SLEEP
OFF,15,30,45,60,90 and 120 minutes; when the LCD TV has been reached the set time, it will
automatically turn off . If the TV has no input signal, the screen will appeared blue screen and
display NO Signal; The TV will automatically change stand by after 15 minutes.
USING THE FEATURES
button to input the channel No. and enter into
ENTER
button again, or simply press the
MUTE
▲/▼ button on the LCD
CHANNEL
button on the LCD TV to
VOLUME +/-
buttons.
VOL +/-
ENGLISH
USING THE FEATURES
19
Advertisement
Table of Contents
