Getting Started; Battery Installation – Freight Train; Battery Notice - VTech Toot-Toot Drivers Gold MineTrain Set User Manual

GETTING STARTED

BATTERY INSTALLATION – FREIGHT TRAIN
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
rear cabinet of the train. Use a
screwdriver to loosen the screw.
3. Install three new AAA (AM-4/
LR03) batteries following the
diagram inside the battery box.
(The use of new alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover by laying it flat against the battery slot
and tightening the screw to secure it.

BATTERY NOTICE

• Use new alkaline batteries or fully charged NI-MH (Nickel Metal-
hydride) rechargeable batteries for best performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
7