VTech Toot-Toot Drivers Series User Manual

Toot-Toot Drivers
User's Manual
BATTERY INSTALLATION
Make sure the unit is turned OFF.
1.
2. Locate the battery cover on the bottom of the
unit. Use a coin or a screwdriver to loosen the
screw.
3. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the screw
to secure.
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child's safety.
NOTE:
Please keep user's manual as it contains important
information.
Unlock the packaging locks:
Turn the packaging lock anticlockwise
several times.
Pull out and discard the packaging lock.
BATTERY NOTICE
• Use new alkaline batteries or fully charged NI-MH (Nickel Metal-hydride)
rechargeable batteries for best performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
®
1
91-003642-000
UK
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on
their respective packaging, indicates they must not be disposed of in
domestic waste as they contain substances that can be damaging to
the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that
the battery contains more than the specified value of mercury (Hg),
cadmium (Cd) or lead (Pb) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market after
13th August, 2005.
Help protect the environment by disposing of your product or batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk www.recyclenow.com
PRODUCT FEATURES
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF SWITCH to
the ON ( ) position. To turn the unit OFF, slide
the ON/OFF SWITCH to the OFF (
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech
power-down after approximately 60 seconds without input. The unit can only be
turned on again by pressing the light-up button or pushing the vehicle quickly.
Note: This product is in a try-me mode in the packaging. After opening the package,
turn the vehicle off and on again to proceed with normal play. If the unit powers down
while playing, we suggest changing the batteries.
ACTIVITIES
1. Slide the ON/OFF SWITCH to turn the unit ON. You
will hear sounds, a song and a phrase. The light will
flash with the sounds.
2. Press the LIGHT UP BUTTON to hear sounds,
songs, phrases and melodies. The light will flash
with the sounds.
) position.
Toot-Toot Drivers will automatically
® ®
2