VTech Toot-Toot Drivers User Manual

Toot-Toot Drivers
User's Manual

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit. Use a coin or a screwdriver to loosen
the screw.
3. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child's safety.
NOTE:
Please keep user's manual as it contains important
information.

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their
respective packaging, indicates they must not be disposed of in domestic waste
®
1
as they contain substances that can be damaging to the environment
and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that
the battery contains more than the specified value of mercury (Hg),
cadmium (Cd) or lead (Pb) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market
after 13th August, 2005.
Help protect the environment by disposing of your product or
batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk
www.recyclenow.com

PRODUCT FEATURES

1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF
SWITCH to the ON (
) position. To turn
the unit OFF, slide the ON/OFF SWITCH to
the OFF (
) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech
power-down after approximately 60 seconds without input. The unit can only be
turned on again by pressing the light-up button or pushing the vehicle quickly.
Note: This product is in a try-me mode in the packaging. After opening the package,
turn the vehicle off and on again to proceed with normal play.
ACTIVITIES
Slide the ON/OFF SWITCH to turn the unit
1.
ON. You will hear sounds, a song and a phrase.
The light will flash with the sounds.
2. Press the LIGHT-UP BUTTON to hear sounds,
songs and phrases. The light will flash with the
sounds.
Toot-Toot Drivers will automatically
® ®
2