VTech Ultimate Track Set User Manual page 6

Building Tips
When attaching a track piece to a TRACK SUPPORT, insert the
track into one side of the TRACK SUPPORT at an angle. Once one
corner of the track is on the inside of a TRACK SUPPORT tooth,
straighten the track so the other corner fits inside the other TRACK
SUPPORT tooth as show below.
1
3
2
1. Build track configurations on a smooth, hard surface for best results.
2. Do not build configurations that are more than three levels.
3. Do not use these track pieces with Toot-Toot Drivers
or rC vehicles.
4. For maximum stability, place the track supports where the track
pieces join together as shown below.
- Three track supports are necessary when joining two or three
tracks together.
motorised
®
5