Polaroid FLU-1911S Owner's Manual page 16

Chapter 2 Installing the LCD TV
METHOD A:
Use a supplied antenna cable to connect to the LCD TV's TV UHF/VHF terminal.
Connect the AC power cord at the back of the TV and connect the power cord
to wall outlet.
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will
not be used for a long period of time. The
only used for switching the LCD TV into standby, it does not disconnect the
device from the main voltage. To completely disconnect the main voltage,
please remove the power plug from the socket.
Press the INPUT button repeatedly on the remote to select input
signal source.
AC IN
button on the front panel is
16