Polaroid FLU-1911S Owner's Manual page 15

Cable TV (CATV) Connection
The cable ground shall be connected to the grounding system of the building accurately, or as
close to the point of cable entry as possible. Use of this TV for other than private viewing of
programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the
general public may require authorization from the broadcast/cable company, and/or program
owner.
■ A 75-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the 75-ohm coaxial cable to the set, connect the 75-
ohm cable into the ANT. terminal.
■ Some cable TV companies off er premium pay channels. Since the
signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
For more specifi c instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the coverter/descrambler provided by your cable TV
company is shown in the diagram below.
RF switch
(not included)
A
IN
O U T
B
VHF/UHF IN
■ The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■ Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
2 set signal
splitter
(not included)
Cable TV converter/
descrambler
(not included)
15
Chapter 2 Installing the LCD TV
Cable TV Line