Connecting The Optional Hpe Apm Module - HP Apollo a6000 Setup And Installation Manual

•
Connect the chassis together using a daisy chain configuration, and then connect one RJ-45 from
one chassis to the top-of-rack switch.

Connecting the optional HPE APM module

IMPORTANT: If you have an APM connected to an Apollo a6000 Chassis, do not connect the
iLO port of the APM and the iLO port of the enclosure to the network at the same time. Having
both ports connected at the same time results in a loopback condition.
Connect the APM to the network (shown in green).
1.
Connect the APM to the chassis (shown in red).
2.
Cabling 31