Advertisement
GEAR HOUSING ASS'Y
The G E A R H O U S IN G A S S E M B LY is a transm ission device w hich turns the P U LS ATO R at 3.3 : 1 low ered
speed through the gear unit assem bly w hich receives pow er at the G E A R S H A FT U N IT.
1) The tw o sides of the G E A R S H A FT U N IT
are supported by the O ILLE S S B E A R IN G
in the G E A R H O U S IN G A S S E M B LY.
2) The G E A R U N IT A S S E M B LY is connected
to the G E A R S H A FT 1 and G E A R S H A FT
U N IT by the G E A R and G E A R U N IT respectively.
3) The tw o sides of G E A R S H A FT 1 are
supported by the O IL S E A L and O ILLE S S
B E A R IN G in the G E A R H O U S IN G A S S E M B LY.
SPIN BELLOW S ASS'Y
The w rinkled rubber device on the bottom of the
B A S K E T S P IN is called S P IN B E LLO W S A S S E M B LY.
It has a w aterseal and a oilless m etal inside
to prevent leakage and so that the B A S K E T S P IN
m ay w ork sm oothly.
FILTER
M uch lint m ay be obtained depending upon the kind of
clothes to be w ashed and sam e of the lint m ay also be
suck to the clothes.
To m inim ize this possibility, a lint filter is provided
on the upper part of the F ILTE R O V E R FLO W to filter the
w ash w ater.
U se of the lint filter during every w ash is
recom m end.
CLEANING THE LINT FILTER
1) R em ove the FILTE R A S from the FILT E R O V E R FLO W by pressing it dow nw ards.
2) Turn the FILT E R A S inside out, and w ash the lint off w ith w ater.
3) R eturn the FILTE R A S it w as, and fix the F ILTE R A S to the FILTE R O V E R FLO W.
STRUCTURE
7
Advertisement
