Advertisement
Problem
The Basket Spin
does not rotate.
Is the Motor hot?
(In the case there is Therm al Protector)
Is the W iring good?
(R efer to the W iring Diagram )
Is the Door Sw itch Lever properly
placed on the Door Spin?
Is the Door Switch term inal properly
connected?
Is the contact of Spin Tim er good?
Is the w ash load w ell balanced?
There are strange
noise and severe
vibration during
Are clothes or the Safety Cover
spinning.
stick out from Basket Spin ?
Is the assembly betw een the Drum
Coupling Assem bly and Spin M otor
or Basket Spin loose?
Is The Basket Spin itself w ell Balanced?
Check Point
YES
The Brake Band is touching
the Drum Coupling Assembly.
N O
NO
N O
YES
YES
YES
YES
YES
YES
N O
YES
Cause
YES
Brake W ire is too long.
Brake Spring is broken.
YES
Power has been cut off
by the Thermal Protector.
NO
Im proper wiring.
NO
Defective connection.
YES
Improper w iring.
NO
D efective Spin Tim er.
D efective Spin M otor.
NO
Basket Spin does not
balanced due to wash load.
N O
Basket Spin does not
balanced due to w ash load.
YES
Im proper assem bly.
NO
Basket Spin unbalance.
13
Solution
Assem ble after loosening
Link Brake.
R eplace Brake Spring.
Spin restart when
M otor cools.
Reconnect the W iring.
Replace Door Switch or
Reconnect the Door Switch.
Reconnect the term inal.
Replace the Spin Tim er.
Replace the Spin Motor.
R eload the clothes so they
are well balanced.
Reload the colthes and
press down the Safety
Cover into Basket Spin .
Tighten the Bolt in D rum
Coupling Assem bly.
R eplace Basket Spin.
Advertisement
