What You Can Do With 800Xa For Safeguard; Prerequisites And Requirements - ABB 800xA Operation

What you can do with 800xA for Safeguard

•
•
What you can do with 800xA for Safeguard
The following are various configuratios which can be done using 800xA for
Safeguard.
•
•
•
•
•

Prerequisites and Requirements

The general hardware and software requirements for the 800xA system is described
in Industrial
12
C&E shutdown level.
Safeguard system status and control
Configure the connection of the workplace to Safeguard controllers on
MasterBus 300 control network.
Setup the workplace for handling the process data defined in the database of
Safeguard controller. The database is uploaded from the controllers through
network.
Setup the event handling for the process events that are reported from the
Safeguard controllers.
Collect and present System status for the Safeguard controllers.
Apply filter to suppress display of events arising from a specified controller.
IT
800xA, System, System Installation (3BSE034678*).
Section 1 Introduction
3BNP004849-600