Subscribe to Our Youtube Channel
Related Manuals for Taoglas ZRM500
Summary of Contents for Taoglas ZRM500
- Page 1 ZRM500 High Performance Rugged Mobile Smart Antenna Platform ZRM500.A.02 Product Specification & Quick Start Guide SPE-16-8-081/A/DC...
- Page 2 Disclaimer Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein.
- Page 3 ZRM500 High Performance Rugged Mobile Smart Antenna Platform The ZRM500 sets a new bar for performance, level of integration, and ease of installation in the M2M smart antenna platform space. It delivers the most advanced communications, networking, and tracking technologies in a waterproof enclosure that can be used in almost any environment.
- Page 4 The ZRM500 has an extremely simplified installation and mounting procedure. The smart antenna sits in a single punched hole made in any rigid sheet surface and is secured with single nut from the bottom side. Once secure, the unit itself and the interface to the mounting surface are fully waterproof and pressure washer safe.
- Page 5 Specifications System Features High performance processor system: 800MHz ARM Cortex Dual Core TCP/IP, UDP/IP, DHCP, HTTP, IP Router, PPP, A9 microprocessor with hardware encryption accelerator running HTTP Web server, Telnet DHCP server, embedded Linux DDNS, DDNS Client, NAT, SNMP, TAIP, TSIP, TFTP, IP port forwarding VPN support: VPN (SSL v2, TLS v1) SSH server, SCP, SFTP 72-channel GPS receiver, GPS/Glonass support with Assistance Acquisition Sensitivity -148dBm, Tracking Sensitivity -167dBm...
- Page 6 PoE Unit Ethernet Cable Benchtop Bracket The following list of items are required to get the ZRM500 configured prior to bench testing: (1) ZRM500 Unit (1) Power Over Ethernet (PoE) switch. We recommend the ‘WS-GPOE-1-24v30w’, which includes a 24-volt power supply.
- Page 7 You will now see the ‘Status’ webpage. Click on the word “Cellular” then locate the APN field and enter your APN (APN is provided by your service provider). Click on the “Save and Apply” button. See Figure 7. Your ZRM500 is now provisioning on the cellular network.
- Page 8 For more sales or support contact zrmsupport@taoglas.com Ireland : Taiwan : United States : Germany SPE-16-8-081/A/DC...
Need help?
Do you have a question about the ZRM500 and is the answer not in the manual?
Questions and answers