JVC KW-V340BT Instruction Manual page 22

Tuner Tuner
Operation keys on source control screen
• The following explanations state the operation keys
for KW-V240BT, unless stated otherwise.
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also "Common operation keys on source control
screen" on page 8.
Touching the operation keys performs the following
actions:
6
(Hold) Presets stations automatically.
[SSM ]*1
[MONO]*1 Activates monaural mode for better FM
reception (stereo effect will be lost).
• The MONO indicator lights up while
monaural mode is activated.
• To deactivate, touch [MONO] again.
[TI]*1 (For FM RDS features)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to traffic information if
available. The TI indicator lights up in
white.
• If the TI indicator lights up in orange,
tune into another station providing
Radio Data System signals.
• The volume adjustment for Traffic
Information is automatically
memorized. The next time the unit
switches to Traffic Information, the
volume is set to the memorized level.
• To deactivate, touch [TI] again.
18 ENGLISH
[MODE ]*1 Change the settings for the selected
tuner reception on <Tuner Mode>
screen. (Page 19)
p
[PTY]*1*2 (For FM RDS features)
Enters PTY search mode.
1 Touch [PTY].
2 Touch and hold a PTY code to search
for.
If there is a station broadcasting a
program of the same PTY code as you
have selected, that station is tuned in.
[SEEK]
Changes the seek mode for [
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations one
after another
• MANU: Manual search
[ S ]/[ T ] Searches for a station.
• The search method differs according
to the selected seek mode (see above).
*1 Appears only when FM is selected as the source.
*2 Only English/Spanish/French/German/Dutch/ Portuguese are
available for the text language here. If another language has
been selected in <Language> (Page 35), the text language
is set to English.
Presetting stations in the memory
You can preset five stations for each band.
Automatic presetting — SSM (Strong-
station Sequential Memory) (for FM only)
On the source control screen, touch as follows:
The local stations with the strongest signals are found
and stored automatically.
S T
]/[ ].
Manual presetting
1
Tune in to a station you want to preset.
2
Select a preset number to store into.
E.g. Tuner source control screen for KW-V240BT
The station selected in step 1 is stored into the
preset number [P1] to [P5] you have selected.
(Hold)
(Hold)