Setup Mode - GoPro ROCKY POINT User Manual

/ Multi-Shot Mode
SPOT METER
Spot Meter is good for capturing photos
is different from where you are. Examples include
of the outdoors from within a car or
standing in the sun. Spot Meter automatically sets the exposure based
on a single spot in the middle of the image. The options for this setting
are Off (default) and On.
Note: Changes that you make to Spot Meter in Multi-Shot settings apply only to multi-shot capture.
To adjust this setting for video capture, adjust Spot Meter in Video settings. To adjust this setting for
photo capture, adjust Spot Meter in Photo settings.
54
in a setting where the lighting
capturing photos
in a shaded environment while
SETUP MODE SETTINGS
In Setup mode, you can change settings that apply to all camera
modes. To change a setting, your camera must be connected to
the GoPro App or the remote. For more information, see
Camera Settings (page 20).
When you disconnect your camera from the app or the remote, your
camera saves the settings and returns to two capture modes: Video
and Time Lapse.

/ Setup Mode

Accessing
55