Connectors For Fpc Board - Canon PowerShot G10 Service Manual

1.4 Connectors for FPC Board

This product uses six types of connectors for the FPC board.
1 Type A
2 Type B
3 Type C
4 Type D
5 Type E
6 Type F
UNLOCK
CAUTIONS:
1. For Type D, Type E and Type F connectors, make sure to set them to the
unlocked state before removing and inserting FPC board. After FPC board
is inserted, set them to the locked state
2. The FPC board is equipped with holes as shown. Use them for removal and
insertion by inserting the tweezers into them as required.
The contact-piece
should face
upward
Unconnected state
The contact-piece
should face
downward
Unconnected state
Unconnected state
The contact-piece
UNLOCK
should face
upward
Unlocked state
The contact-piece
UNLOCK
should face
downward
Unlocked state
The contact-piece
should face
upward
Unlocked state
Fig. 2 Connectors for FPC board
.
2
Connected state
Connected state
Connected state
LOCK
Locked state
LOCK
Locked state
LOCK
Locked state
Fig. 3 Holes for removal
Holes