Preparation; Starting Up The Adjustment Software - Canon PowerShot G10 Service Manual

3.6 Preparation

Before starting up the Adjustment Software, follow the preparatory steps below:
1. Obtain all the tools necessary for the adjustment.
2. For the IS 1 Adjustment jot down the data written on the Optical Unit Flex. You will need it later.
3. Connect the Camera to the Power Source with the AC Adapter Kit ACK-DC50 (CA-PS700, AC Cable).
4. Set the Replay Mode on the camera.
5. Connect the Camera's Digital terminal to the PC's USB Port with INTERFACE CABLE IFC-400PCU.
Compact Power Adapter
CA-PS700
6. Turn on the camera while pressing the left side of the cross key and the Print/Share button.
Note: Perform the preparation in the following order otherwise the camera won't work properly.

3.7 Starting up the Adjustment Software

After completing the preparatory steps, double-click PowerShotG10.exe in the folder where the Adjustment Soft-
ware is extracted. (The Adjustment Software starts up.)
Personal Computer
USB
INTERFACE CABLE
IFC-400PCU
CAMERA BODY
DIGITAL
4