ViewSonic CDP9800-CN User Manual page 44

NOTE:
1. Behavior at lock modes
Lock Mode
Button Lock
MENU Lock
POWER Lock
Remote control disable
2. Example for value setting of SET_TV channel DTV
012-0: 0x 30 31 32
012-1: 0x 30 31 42
1012-2: 0x 41 31 52
1512-3: 0x 46 31 62
3. Tiling definition of H Monitors/ V Monitors/ and Position
H MONITORS
4. Date & Time format definition
Value 1
Date 0: Year
1: Month+Day
Time 0: Hour(24-hr format)+Min
1: Sec
Behavior
1. Lock all buttons on the front panel and RCU, except for "Power"
2. All the SET functions should be workable via RS32, even the ones with
according hot key in RCU like Mute,...etc.
1. Lock "MENU' key of front panel and RCU
2. The Factory and Hospitality modes should not be blocked for the model using
MENU-combined key to enter these two modes. Alternative approach will be
indicated separately if any limitation by model.
1. Lock "POWER" key on the front and RCU.
2. The SET_POWER on/off should be workable via RS232, but does not mean
the POWER lock will be released under this case.
3. Can not be unlocked by reset in OSD setting
4. Will auto AC power-on in power-lock
5. Under power-lock, the set will not enter power saving when no PC signal and
neither not turn off when no other video signals after 15min.
Lock the RCU keys, but keep the front panel buttons workable.
Position
Value 2
Year code of the first 2 digis
Month code
Hour code
0
35
Value 3
Year code of the last 2 digis
Day code
Minute code
Second code