Page 2
TOOLS REQUIRED PHILLIPS SCREWDRIVER 1 PERSON APPROXIMATELY ASSEMBLY 1 HOUR ASSEMBLY HARDWARE 12 PCS 4 PCS 4 PCS 8 PCS 27 PCS PARTS FRAME SIDE SHORT CROSSBAR SHORT TABLETOP KEYBOARD SIDE 4 PCS 1 PC 2 PCS 2 PCS CPU STAND BAR CPU STAND LONG CROSSBAR LONG TABLETOP BAR...
Page 3
PRODUCT ASSEMBLY Please retain these instructions for future reference. Assemble the short table frame. Attach the part O slider to the part D keyboard side with two part 4 screws. Repeat to Attach the keyboard frames to the short table. assemble another keyboard frame.
Page 4
Attach the part N keyboard platform to the keyboard frames. Assemble the CPU stand. Assemble the long table frame. Pg. 4...
Page 5
NOTE: The short and long tables can be placed on either side according to your preference. Before continuing assembly, make sure to place the tables in your preferred position. Place parts I and J between the two table frames and secure them with four part 1 screws, two on each side. Attach the part K, L, and M tabletops to the frame.
Page 6
NOTICE • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws and knobs before use. • Reconfirm that all bolts, screws, and knobs are secure every 90 days. •...
Need help?
Do you have a question about the SKY2261 and is the answer not in the manual?
Questions and answers