Table of Contents
Advertisement
Cleaning the Camera Optics
Important: Protect the DMC 2 camera from dirt, dust, rain and moisture. Damage
caused by these conditions may not be covered by the warranty. Always protect the
shutter, the anti-aliasing filter (behind the shutter), and the CCD sensor by placing the
cap on the camera c-mount opening whenever the camera is removed from the micro-
scope. This will also minimize the need to clean the camera optics.
Caution: The DMC 2 camera is a precision optical instrument. Carefully follow the
instructions in this section when you clean it. Failure to do so could damage the shut-
ter or the anti-aliasing filter and void your warranty.
90
Next
Advertisement
Table of Contents
