Verifying Sharp Focus Digitally
If necessary, you can fine-tune your image focus digitally with the DMC 2 software:
1 Click the image to display the zoom and focus box.
2 Drag the zoom and focus box to the area of interest.
3 Zoom into the area of interest by clicking
4 Click Focus Tool on the Tools menu.
The Focus Tool box appears.
5 Adjust the microscope focus knob until the two colored indicator bars are farthest
to the right.
The red bar indicates the maximum sharpness achieved so far. The other bar indi-
cates the current sharpness.
6 Close the Focus Tool box by clicking the Close button in the upper right corner.
.
32