Table of Contents
Advertisement
Problem: Device not recognized
Failure of your computer to recognize a SCSI device could be caused by any of the fol-
lowing:
Device not turned on. Turn the power switch on. (See instructions for turning the
device on.)
Cables loose or disconnected. Check all cable connections. (See instructions for
connecting the SCSI cables.)
Device turned on after computer. Make sure the device is turned on, then restart
the computer.
Incorrect SCSI address. Make sure the device has a unique SCSI address. (See
instructions for setting the SCSI address of the device.)
Next
134
Advertisement
Table of Contents
