Invacare® Ultra Low Maxx by Motion Concepts
Adjusting the Width
1. Loosen the clamping block A to adjust the entire
footplate position (width) in and out along the pivot
post B.
Adjusting the Angle
The footplate angle can also be adjusted via the setscrew
on the inside of the footplate bracket.
54
Fig. 4-53
1. Tighten or loosen the set screw A to increase or
decrease the footplate angle accordingly.
4.14 Heavy Duty Legrests
4.14.1 Swing Away Heavy Duty Legrests
The legrests use a user friendly lever handle that locks and
unlocks the legrest, allowing the legrest pin to pivot/rotate
about the legrest receiver.
1.
Place the lever handle A in the unlocked position.
2. Swivel the legrest outward.
Fig. 4-54
Fig. 4-55
60101832-A