ViewSonic LS620X User Manual page 51

Function
High Altitude
A mode for operation in high altitude areas. See
a high altitude environment" on page 30
Mode
Audio Settings See
Light Source
See
Settings
Security
See
Settings
Selects a baud rate that is identical with your computer's so
Baud Rate
that you can connect the projector using a suitable RS232
cable and control the projector with RS232 commands.
Selects a preferred closed captioning mode when the selected
input signal carries closed captions.
•
Closed Caption
Caption Version
To view captions, select CC1, CC2, CC3, or CC4 (CC1
displays captions in the primary language in your area).
Standby
See
details.
Settings
Wired LAN
See
on page 31
LAN Control
AMX Device Discovery
Settings When this function is On, the projector can be detected by
AMX controller.
MAC Address
Displays the mac address for this projector.
Returns all settings to the factory preset values.
Reset All
Settings
Description
"Adjusting the sound" on page 38
"Setting Light Source Settings" on page 50
"Utilizing the password function" on page 20
Captions: An on-screen display of the dialogue, narration,
and sound effects of TV programs and videos that are
closed captioned (usually marked as "CC" in TV listings).
This function is only available when a Composite video
input signal is selected and its system format is NTSC.
"Using the projector in standby mode" on page 38
"Controlling the projector through a LAN environment"
for details.
The following settings will still remain: Keystone,
Projector Position, High Altitude Mode, Security Settings,
Baud Rate, LAN Control Settings.
46
"Operating in
for details.
for details.
for details.
for details.
for