7
Error Information
General Error Messages
General Error Messages
Timeout
The timeout threshold was exceeded.
Probable cause
1
2
108
The analysis was completed successfully,
and the timeout function switched off the
module as requested.
A not-ready condition was present during a
sequence or multiple-injection run for a
period longer than the timeout threshold.
Suggested actions
Check the logbook for the occurrence and
source of a not-ready condition. Restart the
analysis where required.
Check the logbook for the occurrence and
source of a not-ready condition. Restart the
analysis where required.
Agilent 1260 Infinity Standard Autosampler User Manual