NETGEAR R7300DST Quick Start Manual page 9

3. Connect your modem.
Internet
Cable or
DSL
a. Plug in, then turn on your modem.
b. If you removed the batteries, replace them.
c. With an Ethernet cable, connect your modem to the yellow
WAN (Internet) port on your DST router.
4. Add power to the DST router.
Internet
Cable or
DSL
a. Connect the power cord to the DST router and plug the
power cord into an outlet.
Note:
b. Wait for the Power LED on the front panel to light amber
and turn white.
If no LEDs are lit, press the Power On/Off switch on the
rear panel of the DST router to the On position.
Modem
Modem
Do not plug the power cord into a surge protector.
Ethernet cable
Ethernet cable
Power
cord
7
DST router
DST router