Dst Router Leds - NETGEAR R7300DST Quick Start Manual

DST Router LEDs

The LEDs on the top of the DST router light to indicate DST router
activity:
LED
Power LED
Internet LED
2.4 GHz WiFi LED
5 GHz WiFi LED
USB 1 LED
USB 2 LED
Description
• Solid white. The DST router is ready.
• Solid amber. The DST router is starting.
• Blinking amber. The firmware is upgrading, or the
Reset button was pressed.
• Blinking white. The firmware is corrupted.
• Off. Power is not supplied to the router.
• Solid white. The Internet connection is ready.
• Solid amber. The DST router detected an Ethernet
cable connection to the modem.
• Blinking white. The port is sending or receiving traffic.
• Off. No Ethernet cable is connected between the
DST router and the modem.
• Solid white. The 2.4 GHz WiFi radio is operating.
• Blinking white. The DST router is sending or receiving
WiFi traffic.
• Off. The 2.4 GHz WiFi radio is off.
• Solid white. The 5 GHz WiFi radio is operating.
• Blinking white. The DST router is sending or receiving
WiFi traffic.
• Off. The 5 GHz WiFi radio is off.
The USB 1 LED is for the blue USB 3.0 USB port. The USB
2 LED is for the USB 2.0 port.
• Solid white. A USB storage device is connected and is
ready.
• Blinking. A USB storage device is plugged in and is
trying to connect.
• Off. No USB storage device is connected, or someone
clicked the Safely Remove Hardware button on the
DST router's web interface and it is now safe to remove
the attached USB storage device.
2