NETGEAR R7300DST Quick Start Manual page 11

9. Connect a device to the DST router.
Internet
Cable or
DSL
You can use a wired connection to connect a computer to the
DST router, or you can use a WiFi connection to connect a
computer or WiFi device to the DST router:
• To connect using a wired connection, use an Ethernet
cable to connect an Ethernet port on your computer to an
Ethernet port on the DST router.
• To connect using a WiFi connection, use the WiFi network
name and password on the DST router's product label.
10. Log in to the DST router.
The first time that you log in to your DST router, NETGEAR
genie displays.
If NETGEAR genie does not display, try the following:
• Close and reopen the browser.
• Make sure that your computer is connected to one of the
four Ethernet ports on the DST router, or that you are
connected to your DST router's WiFi network.
• Make sure that the DST router is receiving power and that
its Power LED is lit.
Ethernet cable
Modem
Power cord
Computer
DST
router
Ethernet cable
9
Computer