To Access The Usb Storage Device From A Mac - NETGEAR R7300DST Quick Start Manual

2. On a Windows computer that is connected to the network,
select Start > Run, enter \\readyshare in the dialog box, and
click the OK button.
A window displays the files and folders on the device.
¾ To access the USB storage device from a Mac:
1. Connect your USB storage device to a USB port on the
DST router.
NETGEAR recommends that you use the blue USB 3.0 port on
the DST router to get the best USB device access speed.
If your USB storage device uses a power supply, you must
connect its power supply.
When you connect the USB storage device to the DST router's
USB port, it might take up to two minutes before it is ready for
sharing. By default, the USB storage device is available to all
computers on your local area network (LAN).
2. On a Mac that is connected to the network, launch Finder and
select Go > Connect to Server.
The Connect to server page displays.
3. Enter the smb://readyshare in the Server Address field and
click the Connect button.
4. When prompted, select the Guest radio button.
If you set up access control on the DST router and you allowed
your Mac to access the network, select the Registered User
radio button and enter admin for the name and password for
the password. For more information about access control, see
the user manual, which is available online at
http://downloadcenter.netgear.com
DST router's user interface.
5. Click the Connect button.
A window displays the files and folders on the device.
or through a link in the
21