Table of Contents
Advertisement
24
www.electrolux.com
A
A
D
A 549 mm
N 550 (-0,+1)
3. Use a minimum of 2 screws to attach
the oven on the 2 sides (A).
13.3 Installing the oven under a
work surface
Before the installation, connect the oven
to the electrical supply. Refer to "Electrical
connection".
During installation in
combustible matter, NIN SEV
1000 and fire protection
guidelines and regulations of
the Association of Cantonal
Fire Insurance shall be strictly
adhered to.
1. Place the appliance in front of the
recess and connect the mains plug.
Make sure the cable is free when you
slide the appliance.
2. Push the appliance into the recess.
A = appliance, N = recess
180
mm
A
A
N min.
580 mm
A
567 mm
mm
A
~50 mm
A
N 600
mm
A 595
A
mm
435
mm
5 / 6 =
635 mm
6 / 6 =
762 mm
105
mm
3. Use a minimum of 2 screws to attach
13.4 Electrical connection
Use a power cable of H05VV-F or higher.
Install the appliance with a socket supply
line. If there is no socket supply line, the
fixed home electrical system must include
an isolating device with at least a 3 mm-
contact separation to enable a
simultaneous and all-pole cut off from the
mains (according to NIN SEV 1000). The
customer must have a socket for the
A
A
180
mm
115 mm
A 567
20
mm
mm
A 549 mm
N 550(-0,+1) mm
the oven on the 2 sides (A).
When installing next to a wood-fuelled
boiler, a heat-proof and heat-insulating
plate must be mounted at the height
of the appliance and at least 30 cm
deep.
A
WARNING!
If service is required always
disconnect the appliance
from the power supply.
B
~50 mm
N 600
mm
A 595
mm
442 mm
N min.
550 mm
min. 20 mm
B
10
mm
A
20 mm
Advertisement
Table of Contents
