Table of Contents
Advertisement
8.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press
3. Select the category and dish. Press
to confirm.
4. Select the function: Weight Automatic.
Press
5. Touch
weight. Press
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and the
plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
to confirm.
to confirm.
or
to set the food
to confirm.
The automatic programme starts.
6. You can change the weight at any
time. Press
weight.
7. When the time ends, an acoustic
signal sounds. Press any symbol to
deactivate the signal.
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.
The appliance calculates an
approximate end of cooking
time. It depends on the
quantity of food, the set oven
function and temperature.
Food categories: meat, poultry
and fish
1. Activate the appliance.
2. Insert the tip of the core temperature
sensor into the centre of meat or fish,
in the thickest part if possible. Make
sure that at least 3/4 of the core
temperature sensor is inside of the
dish.
3. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
ENGLISH
or
to change the
15
Advertisement
Table of Contents
