Taser Axon Mic AX1004 User Manual page 6

Function LED
Shows when certain functions are enabled.
Function Enabled
Mute
Device error
Bluetooth feature is booting up
Wireless accessory configuration (WAC)
Use the power switch to turn the Mic off and on.
Connection Socket – Enables data transfer and recharging. On/Off Switch – Turns the Mic's
power on or off.
On/Off Indicator – When the Mic's power is turned on, the red portion is exposed. When
the Mic power is turned off, the red portion is covered from view.
Speaker – Provides audio notifications.
Function Button – Used in device pairing, to mute the device, and to add markers to the
audio as it is recorded.
EVENT Button – Used to start and stop recording. (Double-press to start; hold for 4
seconds to stop recording.)
The Mic might take several additional seconds to close out of the video when it is powered
off before stopping an event.
Battery Status Button – When pressed, the Battery button lights up the Battery LED, which
momentarily indicates the remaining battery capacity only (it does not indicate the
operating mode).
Battery LED
When lit, momentarily indicates the remaining battery capacity (it does not indicate the
operating mode).
Battery Status
Battery capacity is 41–100 percent
Battery capacity is 20–40 percent
Battery capacity is less than 20 percent
Battery is critically low
When you turn the Mic on, the Operation LED turns solid red until the system is ready to
use. Then the Operation LED blinks green (BUFFERING mode) and the Battery LED goes
out.
Dual-Channel Microphone – For audio recording.
Function LED
Blinking blue
Solid red
Solid blue
Blinking magenta
Battery LED
Green
Yellow
Red during operation; flashing red and yellow
during charging
Blinking red and yellow
Page 6 of 22