Chapter 3: Recording With The Axon Mic; Operating Modes; Buffering Mode (Turning On The Microphone) - Taser Axon Mic AX1004 User Manual

Table of Contents

Advertisement

Chapter 3: Recording with the Axon Mic

Operating Modes

The Axon Mic has 2 operating modes:
1
BUFFERING (turning on the device and starting pre-event buffering)
2
EVENT (event recording)

BUFFERING Mode (Turning on the Microphone)

Move the ON/OFF switch on the Axon Mic to the ON position.
With the microphone turned on, the Axon system is in the BUFFERING mode. When
BUFFERING begins:
The Operation LED on the Axon Mic will blink green.
By default, audio in the BUFFERING mode is OFF.
The Mic will not be capturing anything unless the agency has configured "audio in
buffer" ON, and will not record to permanent memory while in BUFFERING mode.
When configured at the agency level to be ON, buffered audio duration is 30 seconds by
default (00:00:30).
When you activate the EVENT mode, the buffered audio (if this feature is enabled at the
agency level) captured directly before the event, up to 30 seconds, will be saved and
attached to the event in permanent memory. This feature is intended to capture the audio
of an incident just before your activation of EVENT mode.
With default settings, the system does not capture audio in BUFFERING mode, so
anything recorded in that mode will be video-only. Buffering mode starts only after
Page 10 of 22

Advertisement

Table of Contents
loading

Related Products for Taser Axon Mic AX1004

Table of Contents