Table of Contents
Advertisement
Chapter 4: Notification Reference Tables
Audio Prompts
The Axon Mic emits beeping sounds called "audio prompts" to notify you of the system
status. These audio prompts usually occur after you perform an action with the
microphone. These audio prompts are accompanied by a vibration that matches the beeps.
Operating Mode
Powering on or off
Recording an event
Press the Battery button while
the device is recording
The device is ending an event
and re- turning to BUFFERING
mode
The battery is at 20 percent
capacity or lower
The device's memory is full
LED Status
Operation LED
Operating Mode
Recording
Recovering interrupted audio recording
Buffering
Booting up/powering down
Error state
* When the Function LED also is blinking red.
** When the Function LED also is solid red.
Function LED
Function Enabled
Mute (no audio capture)
Device error*
Bluetooth feature is booting up
Audio Notification
One beep
Two beeps (every 2 minutes)
Two beeps
One long beep
Four quick beeps (every 5
minutes)
Three beeps. The device will not
start recording.
Blinking Red
Blinking Green
Solid Red
Blinking blue
Solid red
Solid blue
Haptic Notification
(Vibration)
Once
Twice (every 2 minutes)
None
Once, long-duration
Four times, quickly, every 5
minutes
Three times
Operation LED
Function LED
Page 14 of 22
Advertisement
Table of Contents
