Keyguard - SoftBank 840P User Manual

Changing PIN/PIN2
⿟
Activate PIN entry before changing PIN (
Main Menu 4 4
Settings Security
Change PIN2
1
Enter current PIN/PIN2
2
Enter new PIN/PIN2
3
Reenter new PIN/PIN2
PIN/PIN2 Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is
incorrectly entered three times. Cancel PIN Lock or PIN2
Lock by entering Personal Unblocking Key (PUK/PUK2).
⿟
For information about PUK/PUK2, contact SoftBank Mobile Customer
Center, General Information ( Z P.18-32).
1
In PIN lock mode, enter PUK/PUK2
2
Enter new PIN/PIN2
3
Reenter new PIN/PIN2
Note
⿟
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled. Write down PUK/PUK2.
⿟
For procedures required to unlock USIM Card, contact SoftBank Mobile
Customer Center, General Information (
Z P.XX-2).
Lock handset keys to prevent accidental operation.
4
Change PIN or
⿟
1
Z
P.18-32).

Keyguard

While locked, appears in Standby.
In Standby, press and hold
7
⿟
To cancel: When appears in Standby,
7 A [YES]
Note
⿟
Alternatively, Main Menu 4 Settings 4 Phone Settings
4 Keyguard 4
.
⿟
Emergency numbers (110, 119, 118) are dialable even if Keyguard is
activated (number does not appear on Display). To correct misentries,
press L , then re-enter number.
⿟
If Keyguard is activated, handset will not power down. Cancel Keyguard
then press and hold L .
10
10-3