Keyguard - SoftBank 832P User Manual

PIN Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is
incorrectly entered three times. Cancel PIN Lock or PIN2
Lock by entering PIN Unblocking Key (PUK/PUK2).
For information about PUK/PUK2, contact SoftBank Mobile Customer
Center, General Information (
In PIN lock mode, enter PUK/PUK2
1
Enter new PIN/PIN2
2
Reenter new PIN/PIN2
3
Note
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled (Even turning off power is counted as one incorrect
entry.). Write down PUK/PUK2.
For procedures required to unlock USIM Card, contact SoftBank Mobile
Customer Center, General Information (
P.18-33).
P.18-33).

Keyguard

Lock handset keys to prevent accidental operation except
when turning power on/off or answering incoming calls.
In Standby, press and hold
1
When Keyguard is set, appears.
To cancel Keyguard, repeat operation.
While Keyguard is Active
Emergency numbers (110, 119, 118) are dialable even when Keyguard
is active. Entered numbers do not appear on Display. Once numbers
are dialed, Keyguard is canceled.
Press to disable Calendar event tone or Alarm.
Keyguard can be canceled even during a call.
Note
Turning off power cannot cancel Keyguard.
11
11-3