Samsung RHF025EE Series Installation Manual page 4

WARNING
 Avoid the use of an
extension cord and do not
share the power outlet
with other appliances.
Incomplete connection,
defective insulation or
exceeding the permissible
current may cause electric
shock or fire.
CAUTION
 Install the unit in a place
where it is strong enough to
hold the product weight.
When installed in place
where it is not strong
enough to withhold the
product weight, the unit
may fall and cause injury.
 Install the product inside
heat insulation over the
ceiling not to be contacted
with the outside air.
If the product is installed
out of the insulation, it may
result in electric shock or
malfunction due to moisture
generated in the product.
 Do not install the product
in a place where it is
exposed to inflammable gas
leakage.
 Do not install the product
in humid place such as
bathroom. It may cause
electric shock or malfunction.
4
E-
 This indicates the possibility of serious injury or death.
 Make sure to turn off the
main power when setting up
the product's electric circuit
or power cords. There is
electric shock.
 The product should be
installed in accordance with
the National Electrical
regulations.
 This indicates the possibility of serious injury or damage to environments when
operated incorrectly.
 Make sure to use the part
provided or specified parts
for the installation work. The
use of defective parts could
cause injury, fire, electric
shock or the unit falling, etc.
 Do not install the product
in the place where exposed
to sulfurous acid or steam
because it may damage the
parts or cause malfunction.
 Do not install the product in
the place where generates
toxic gas such as chemical
factory. It may cause fire or
gas poisoning.
 Check the product for
damage that may have
taken place during
transportation and do not
install or use damaged
equipment.
 Ensure that the national
safety code requirements
have been followed for the
main supply circuit. Ensure
that a properly sized and
connected ground wire is in
place.
 All of the manufacturing and
packaging material used for
your new appliance are
compatible with the
environment and can be
recycled.
 Dispose of the packaging
material in accordance with
the local requirements.
 Install a ground leakage
breaker depending on the
installation place (where it is
humid). If not, it may cause
electric shock.
 The product must be
installed according to the
national electrical
regulations.

The maximum input
power and current is
measured according to the
IEC Standard and the input
power and current is
measured according to
ISO standard.