Compression Damping - Polaris Outlaw 9922479 Owner's Manual

Rear Suspension

Compression Damping

Use a flat-blade screwdriver to make damping adjust-
ments. The factory setting is at 10 clicks from fully
closed. See Suspension Settings on page 152.
The compression damping clicker is located on top of
the shock reservoir, under the right rear fender.
1. Turn the clicker clockwise (1) to increase compres-
sion damping.
2. Turn the clicker counter-clockwise (2) to decrease
compression damping.
Maintenance
2
Clicker
1
157