Advertisement
Using the PERS
Making an alarm call
Press the red button on the Help Activator
or the red alarm button on the home
console unit. The home console unit will
announce 'Do not worry your alert system
is dialling for assistance'. The call will be
answered by an operator at the response
center. Tell the operator why you have
generated the alarm call and they will
arrange for assistance.
Cancelling a Help call
Wait 5 seconds (after the alarm button is pressed) and press the green
reset button. The home console unit will announce 'The emergency call has
been cancelled'. This in-built delay prevents accidental cancellation of an
alarm.
Answering calls remotely via the portable Help Activator
The Help Activator can be used to answer incoming telephone calls by
pressing the Help Activator button while the telephone is ringing. When
pressed, the home console unit will answer the call in hands-free mode
using the loudspeaker. To revert to handset mode, just pick up the handset
of a connected telephone. To end a hands-free call, press the button on the
Help Activator again or press the reset button. Calls can also be answered
in hands-free mode at the home console unit by pressing the reset button.
For installation instructions please visit tunstallamac.com/??????
Advertisement
