ISDT BatteryGO BG-8S User Manual page 9

VTC擄翄
When XT60i is connected to the battery, BG-8S could perform USB charging function. In USB
charging, after 2 minutes without operation. display will turn off, and light up breath light to
purple.
If current is more than 3A or power is more than 26W it will turn off USB charging.
If temperature is more than 60 °, it will stop charging until temperature is lower than warning
level. It will recharge automatically.
Battery capacity and BattGo mark would appear only smart battery is connected.
Lowest input voltage: For normal battery, if balance port is connected single cell protection volt-
age would be displayed as lowest input voltage, without balance port connected battery total
protection voltage would be displayed as lowest input voltage. For smart battery, single cell
protection voltage would be always showed as lowest input voltage.
Devices with QC:
Input voltage for XT60i
Max voltage difference between each cell
Remaining battery capacity
Battery temperature
Output condition
Connected with BattGo smart battery
Devices without QC:
USB Charge
23.01V
6.3V
0mV
100% 2.0A
12.6W
35℃
3.60V / Cell
00:03:48
Output voltage/power
Output Current
Output power
Alarm voltage